Tag: router
Using an old/unused wireless router as just an access point
by Craig Mayhew on Aug.31, 2008, under Guides/Fixes
Make sure it’s got an IP address that’s easy to remember e.g. if your main router is 192.168.0.1 then make this access point 192.168.0.2
On the old router; disable the UPNP, the DHCP and the router’s firewall (if possible). Plug a cross over cable between the old and new router (if it’s a direct connection). Make sure to plug the cable into the old router’s LAN port (there might be several of these, any will do). Don’t plug the cable into the WAN port on the old router as this will not work.
Now you should be all set and able surf the internet!
